Sofe EZ plate operation process
You can make prints without printmaking tools!
Sofe EZ plate
The production of Sofe EZ plate prints is to use poster paint to color and press the palm to complete the work, even without all kinds of printmaking equipment,
The plate is suitable for drawing and engraving with various pen tools, soft and easy to engrave.
The edge of the notch is flat and the printed image is clear. Special painting on the layout, good for paint adhesion, poster paint, watercolor, ink can be colored.
Operation process reference:
After the pen engraving is completed, the ink is repeatedly applied with advertising paint, and the work is imprinted with hands.
1. Engraving
It is recommended to use a thick pencil (triangular pen for children's calligraphy) to draw thick outline dent lines on the layout.
2. Make alignment
Take a piece of board or thick cardboard for the bottom, first draw the size and position of the printing paper, and then fix it in the center with a small amount of double-sided tape
Plate, the final printing paper is fixed on the registration plate on one side.
1. Engraving
It is recommended to use a thick pencil (triangular pen for children's calligraphy) to draw thick outline dent lines on the layout.
2. Make alignment
Take a piece of board or thick cardboard for the bottom, first draw the size and position of the printing paper, and then fix it in the center with a small amount of double-sided tape
Plate, the final printing paper is fixed on the registration plate on one side.
3. Coloring
Use poster paint to color the area of the layout , be careful not to paint in the dent.
Use poster paint to color the area of the layout , be careful not to paint in the dent.
4. Imprint
After the small area is colored, immediately cover the printing paper while the ink is not dry, and print with the palm and fingers.
After the small area is colored, immediately cover the printing paper while the ink is not dry, and print with the palm and fingers.
5. Complete the picture
Repeatedly paint and imprint until the work is completed. It is recommended that the color block should be made with a dark color first, and then a bright color.
Layer colors to increase the sense of color hierarchy.
Repeatedly paint and imprint until the work is completed. It is recommended that the color block should be made with a dark color first, and then a bright color.
Layer colors to increase the sense of color hierarchy.